Product Description
WTL-A100 N Load moment indicator is composed of sensor, operational amplifier, control actuator and overload indicator, etc. It integrate 3 into 1, which are display, control and warning. When the crane lifting a load, the sensor is occurring deformation. Meantime, converting weight of load into electrical signal, after operation and amplification, indicate the value of weight. When the load reaches 90% of rating, it gives an alarm; When value of weight surpass the rating, the power will be turn off at once. It is widely used in over head travelling crane, elevator and portal/tower crane.
Load Moment Indicator(safe load indicator or Crane computer lmi/sli/rci) is a device which is installed on various sorts of cranes like mobile, crawler, tower, gantry, portal, marine and offshore crane. It alert the operator if the lift is exceeding the safe operating range. In some cases, the device will physically lock out the machinery in circumstances it determines to be unsafe.
It controls the lifting equipment to function as per the manufacturer's suggested safe load charts. Each of the measured parameters like load weight, working radius, control limit,angle and extension of the crane boom, etc will then further be displayed in the operator's cabin.
| GJ Main type |
GJ-1 :to reach the peak normally open ( hook across the boom, loop disconnect) |
| |
GJ-3: to reach the peak normally closed (hook met crane, closed loop) |
| Main parameters |
Applies to DC and AC voltage 12 ~ 380V; Rated current: 5A. |
| |
Rated current: 10A |
| |
Supporting the external hammer weight: ≥ 1.7kg. |
Detailed Images
Application Cases
WTL A100 N load moment indicator system LMI spare parts
Technical Parameters
Weight Measurement Range: 0T~400T
Resolving Ability: 0.1T
Synthetic Errors: ≤5%F.S.;
Working Condition: -30°C~75°C
Relative Moisture under Working Condition: 90%RH(20°C)
Working Voltage: DC24V
IP Grade:weight sensor with IP68;Monitor with IP65
Certificates
Company Introduction
Weite Technologies Co.,Ltd
Founded in 2002, it is national hi-tech enterprise located in Yichang, China. It has been focusing on R&D and OEM manufacturing of lifting safety protection devices such as Load Moment Indicator, Safe monitoring systems, overload limiter, Load cell, Anemometers etc.We continuously concentrate on ensuring lifting equipments run safely as long-term pursuing goal.
"The trusted Safety Partner for Global Top 100 Crane Owning Companies like Tat Hong, Asiagroup, Big Crane and Fortune 500 corps" . Nowadays, WTAU products are widely used in marine industry,electrical, chemical, steel, metallurgy, construction, ports and other industries, and have been wide spreaded to over 70 countries and regions.
Global Partners
FAQ
1) Is your company well-reputated? How to prove that?
It is a China Top 3 brand focusing on Crane Safety Protection Equipment. We are also Safety Partners for Global Top 100 Crane Owning Companies like Tat Hong(top 9), Asiagroup(top 45), Big Crane(top 94) and Top 500 companies such as ABB, Macgragor,TTS,CNOOC,etc. Products are been sold to over 70 countries and regions globally.
2) How to assure the quality?
The Product Warranty for the total item is 12 months. Any problem after installation, we will change the new one for free.
3) How to install the LMI?
English User Manual(include all the details of each item) will be offered for installation and trouble shooting(refer to the pic below). Also free Remote Instant Technical assistance would be offered by our english engineers. Or we can send our engineers to assist you locally.
4) How much is your LMI system?
Send me the crane model, hook number, working conditions(Luffing Tower Working Condition, Pilling) and special requirement and the like. Your contact info is a must.
5) How can I place order?
A: You can contact us by email about your order details, or place order on line.
6) How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T and Paypal, Western Union are the most usual ways we are using.
Related Products
Application Cases
){kind=link}